SAAB WIS ONLINE

PRE-RELEASE

Solenoid valve, charge air (605), A20NFT/LHU

Solenoid valve, charge air (605), A20NFT/LHU

To remove


1. Remove the upper engine cover.

2. Remove the connector (A) from the solenoid valve (B).


3. Press down the catch (C) carefully with a screwdriver and remove the solenoid valve (B) from its mounting.

4. Undo the hoses (D, E, F) from the solenoid valve.


To fit


1. Connect the hoses (D, E, F) to the solenoid valve (B).

D) To the intake manifold

E) To the bypass valve

F) To temp/pressure on turbocharger delivery pipe


2. Fit the solenoid valve (B) to the mounting, make sure the hoses (D, E, F) are not pinched together and adjust them as necessary.

3. Connect the connector (A).

4. Replace the upper engine cover.


PRE-RELEASE