PRE-RELEASE
Spark plug (157)
| Spark plug (157) |
| To remove |
| 1. |
Remove the engine cover.
|
|
| 2. |
Remove the screws (A), move up the respective ignition coil (B) and place it to one side.
|
|
| 3. |
Remove the spark plugs, socket 8394785.
|
|
| To fit |
| 1. |
Check the ignition pin cap as described in
Ignition system, specifications A20NFT/LHU
.
|
|
| 2. |
Fit the spark plugs, keeping the socket straight so the spark plugs are not damaged.
Tightening torque 20 Nm (15 lbf ft) |
|
| 3. |
Fit the relevant ignition coil (B) and fit the screws (A).
Tightening torque 10 Nm (7 lbf ft) |
|
| 4. |
Fit the engine cover.
|
|
