SAAB WIS ONLINE

PRE-RELEASE

Ethanol sensor

Ethanol sensor

Warning

Removal of the fuel tank involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work.

Have a class BE fire extinguisher on hand! Be aware of the risk of sparks, i.e. in connection with electric circuits, short-circuiting, etc.

Absolutely No Smoking!

Ensure good ventilation! If there is approved ventilation for evacuating fuel fumes then this must be used.

Wear protective gloves! Prolonged exposure of the hands to fuel can cause irritation to the skin.

Wear protective goggles.


To remove


1. Remove Air filter, A20NFT/LHU .

2. Remove the cover over the sensor (A).


3. Remove the electrical connection (A).


4. Remove the fuel lines (B). Use 83 95 261 Tool, fuel line .

5. Remove the sensor from the bracket (A).



To fit


1. Fit the sensor to the bracket (A).


2. Fit the fuel lines (B).

3. Fit the electrical connection (A).


4. Fit the cover over the sensor (A).


5. Fit Air filter, A20NFT/LHU .

6. Connect an exhaust extractor. Start the engine and check for fuel leaks.

7. Switch off the engine.


PRE-RELEASE