PRE-RELEASE

Sensor, fuel pressure, A20NFT/LHU

To remove

Warning

Removing the fuel pressure sensor involves working with the vehicle fuel system. The following points should therefore be observed in connection with the procedure:
•	Ensure good ventilation! If there is approved ventilation for extraction of fuel fumes then this must be used.
•	Wear protective gloves! Prolonged exposure of the hands to fuel can cause irritation of the skin.
•	Have a fire extinguisher class BE at hand! Be aware of the risk for sparks, i.e. in connection with circuit breaking, short-circuiting, etc.
•	Absolutely No Smoking!
•	Wear protective glasses.

Lower the fuel pressure. See Lowering of fuel pressure .

Unplug the connector (B).

Remove the sensor (A) from the fuel pipe (C).

To fit

Fit the sensor (A) with a new gasket on the fuel pipe (C).

Fit the connector (B).