SAAB WIS ONLINE

PRE-RELEASE

Control module, EDC16 (595)

Control module, EDC16 (595)

To remove


1. Before removal, carry out Diagnostic procedures before removing control modules.

2. Remove the front right wheel.

3. Remove the Wing liner, front .


4. Bend the cover down under the spoiler.

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


5. Unplug the control module connector.


6. Remove the control module.


To fit


1. Fit the control module.

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



2. Plug in the control module connector.

3. Fit the Wing liner, front .


4. Bend back and screw in the cover under the spoiler.

5. Fit the right-hand Wheel .

6. When replacing a control module, see Diagnostic procedures after replacement of control modules .


PRE-RELEASE