PRE-RELEASE
Glow plug (398), Z19DTR
| Glow plug (398), Z19DTR |
| To remove |
| 1. |
Remove the upper engine cover and insulation.
|
|
| 2. |
Detach the connector.
|
|
| • |
Remove the connector. Take care during removal not to damage the connector.
|
| • |
Blow clean around the glow plugs. Undo and remove them using a 9 mm deep socket.
|
| To fit |
| 1. |
1. Fit the glow plugs.
|
|
| • |
Fit the glow plug. Use a 9 mm deep socket.
Tightening torque 10 Nm (7 lbf ft)
|
| 2. |
Fit the connector.
|
|
| 3. |
Fit the insulation and the upper engine cover.
|
|
