SAAB WIS ONLINE

PRE-RELEASE

Battery tester/battery analyser

Battery tester/battery analyser


The battery analyser uses a measuring method (conductance) that, besides battery voltage, can also measure the battery's current capacity. By using this analyser a uniform battery control method is obtained.

Battery analyser: KM-J-42000-EU-B battery tester

Handling

Handling is described in the battery tester's owner's manual.

Note

In the event of a warranty claim on the battery, the test code from the Battery analyser must be quoted for the claim to be approved.


The analyser requires no power source of its own but is supplied by the battery it is connected to while testing.

Only starter batteries for 12 V can be checked.

Important

Test cables must not be repaired or replaced with other cables as the instrument and its test cables have been calibrated as a unit.

Incorrect values will be obtained if other test cables are used, for example those from another battery analyser.

If the test cables or the instrument are in need of repair, both items must be returned at the same time.


PRE-RELEASE