PRE-RELEASE
Dipped beam bulb, halogen (US/CA/MX)
| Dipped beam bulb, halogen (US/CA/MX) |
| To remove |
| 1. |
Turn the ignition key to the LOCK position.
|
|
| 2. |
LH:
Remove the battery cover, air inlet pipe (A), washer fluid filler pipe (B) and the main fuse box (C).
|
|
| 3. |
Remove the bulb:
|
|
| • |
Remove the protective cover (A) by turning anticlockwise.
|
| • |
Remove the bulb by turning it anticlockwise (B). Then lift the bulb straight out of the headlamp.
|
| • |
Detach the lamp connector (C).
|
| To fit |
| Important | ||
|
When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged. |
||
| 1. |
Fit the bulb:
|
|
| • |
Attach the lamp connector (C).
|
| • |
Fit the bulb by turning it clockwise (B).
|
| • |
Fit the protective cover (A) by turning it clockwise.
|
| 2. |
LH:
Fit the main fuse box (C), washer fluid filler pipe (B), air inlet pipe (A) and battery cover.
|
|
| 3. |
Clear any diagnostic trouble codes.
|
|
