PRE-RELEASE
Control module, AHL (664)/AFL (752)
| Control module, AHL (664)/AFL (752) |
| To remove |
Carry out procedure before control module removal .
| 1. |
Remove the battery cover lid.
|
|
| 2. |
Remove the filler pipe of the washer reservoir.
|
|
| 3. |
Remove the main fuse box cover.
|
|
| 4. |
Remove the nuts.
|
||||||||||
| 5. |
Lift up the control module and detach the connector.
|
|
| To fit |
| Important | ||
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection . |
||
| 1. |
Plug in the connector.
|
|
| 2. |
Fit the control module.
|
|
| 3. |
Fit the main fuse box cover.
|
|
| 4. |
Fit the filler pipe of the washer reservoir.
|
|
| 5. |
Fit the battery cover lid.
|
|
| 6. |
Carry out
Procedure after changing the control module
. The control module is calibrated when "
Add" is carried out, see
calibration of control module
.
|
|
