SAAB WIS ONLINE

PRE-RELEASE

OnStar control module (673), 5D

OnStar control module (673), 5D

To remove

Before removing the unit, perform procedures before removing a control module .


1. Remove the cover.


2. Remove the luggage compartment floor.

3. Remove the OnStar control module's cover.

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .



4. Unplug the connectors.

5. Lift out the OnStar control module.


To fit


1. Position the OnStar control module.

2. Plug in the connector.

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



3. Fit the OnStar control module's cover.

4. Fit the luggage compartment floor.


5. Fit the cover.

6. Carry out Procedure after control module replacement .

7. Carry out reconfiguration of the OnStar-system .


PRE-RELEASE