PRE-RELEASE
Slave cylinder, A20NFT, A19DTR
| Slave cylinder, A20NFT, A19DTR |
| To remove |
| 1. |
Remove the gearbox, see
Complete gearbox, A20NFT/LHU
or
Complete gearbox, Z19 DTR
.
|
|
| 2. |
Detach the delivery pipe.
|
|
| 3. |
Remove the three retaining bolts for the slave cylinder and pull it out.
|
|
| To fit |
| 1. |
Apply
74 96 268 Thread locking adhesive
to the retaining bolts, see
Summary of lubricants and sealants
.
|
|
| 2. |
Bolt on the slave cylinder.
Tightening torque 10 Nm (7 lbf ft) |
|
| 3. |
Fit the delivery pipe to the slave cylinder.
Tightening torque 22 Nm (16 lbf ft) |
|
| 4. |
Bleed the slave cylinder before fitting the gearbox, see
Bleeding the slave cylinder
|
|
| 5. |
Fit the gearbox, see
Complete gearbox, A20NFT/LHU
or
Complete gearbox, Z19 DTR
.
|
|
| 6. |
Bleed the clutch. See
Bleeding the clutch hydraulic system in the car
.
|
|
