PRE-RELEASE
Steering angle sensor, changing (EHPS)
| Steering angle sensor, changing (EHPS) |
To remove
| 1. |
Remove the cable kit connector (1)
Detach and pull away 
|
|
| 2. |
Remove the steering angle sensor (2)
2 x Unscrew bolt (3) Pull the steering angle sensor from the steering gear housing |
|
| 3. |
Cleaning
Clean the sealing surface To fit |
|
| 4. |
Fit the steering angle sensor (2) in the gearcase
Check that the seal (arrow) is fitted correctly Note the fitting position 
|
|
| 5. |
2 x Screw in bolt (3) (6 Nm)
|
|
| 6. |
Attach cable kit connector (1)
|
|
