Control module, tyre pressure (753), 4D
|
|
Control module, tyre pressure (753), 4D
|
|
3.
|
Remove the clip (A) and fold down the inspection hatch.
|
|
4.
|
Remove the control module.
|
|
|
•
|
Press in the lock lugs (A) and detach the bracket (B) by pulling it rearward.
|
|
|
•
|
Detach the connector housing (C) by pulling it straight out.
|
|
|
•
|
Detach the bracket from the control module by prying aside the lock lugs (D) and release the control module from the bracket by pulling it downward.
|
|
1.
|
Fit the control module.
|
|
|
•
|
Fit the bracket to the control module by pulling the control module until the lock lugs (D) engage.
|
|
|
•
|
Attach the connector housing (C).
|
|
|
•
|
Fit the bracket in its recess by pulling the bracket (B) forward until its lock lugs (A) engage.
|
|
2.
|
Raise the inspection hatch and fit the clip (A) in the top edge.
|
