PRE-RELEASE
Emblem, Griffin
| Emblem, Griffin |
Emblems are supplied as a spare part in a pack containing a transparent mounting frame with protective backing tape. The following description shows how to affix the emblem. Use the edges of the mounting frame to support the emblem when fitting on the boot lid.
| To remove |
Protect the paint by masking around the emblem. Use 82 93 474 Removal tool and carefully prise off the emblem.
| To fit |
| Note | ||
|
The emblem must have a temperature of approximately 28-38°C (82-100°F) before it can be fitted. The car should be at room temperature, approximately 20° (68°F). |
| 1. |
Clean the area where the emblem is to be affixed with benzene. Remove the backing tape from the emblem. Keep the emblem in the mounting frame.
|
|
| 2. |
Position the mounting frame's edges as illustrated.
|
|
| 3. |
Press and then remove the frame.
|
|
