PRE-RELEASE
Bonnet
| Bonnet |
| To remove |
| Note | ||
|
It is recommended that 2 people carry out certain steps. |
| 1. |
Open the bonnet.
|
|
| 2. |
Loosen the rear left bonnet seal slightly.
|
|
| 3. |
Remove the clip (A) on the cowl cover and lift the cover slightly.
|
|
| 4. |
Detach the washer hose quick coupling (B).
|
|
| 5. |
Remove the covers (C) for the hinges.
|
|
| 6. |
Remove the bonnet's lower bolts (D).
|
|
| 7. |
Loosen the upper bolts (E).
|
|
| 8. |
Loosen the bonnet damper's upper mounting (F) in the bonnet, locked with a clip. Lay the damper down so as not to damage the paintwork.
|
|
| 9. |
Lift off the bonnet.
|
|
| To fit |
| Note | ||
|
It is recommended that 2 people carry out certain steps. |
| 1. |
Thread the bolts (E)
|
|
| 2. |
Lift the bonnet back in place.
|
|
| 3. |
Thread the bolts (D).
|
|
| 4. |
Fit the bonnet damper's upper mounting (F) in the bonnet.
|
|
| 5. |
Tighten the bolts (D and E).
|
|
| 6. |
Fit the hose on the hinge cover (C).
|
|
| 7. |
Connect the washer hose to the quick coupling (B).
|
|
| 8. |
Fit the cowl cover's clips (A).
|
|
| 9. |
Fit the rear bonnet seal.
|
|
| 10. |
Check the fit of the bonnet and the operation of the bonnet lock and washers.
|
|
