Infill panel, side panel, CV
|
|
Infill panel, side panel, CV
|
|
1.
|
Position the car in an aligning bench and cross-measure if necessary.
|
|
2.
|
Drill out the spot welds on the side panel's infill panel.
|
|
3.
|
Tap loose the side panel's infill panel and align any damaged sheet metal or panels.
|
|
4.
|
Grind all surfaces that are to be welded.
|
|
5.
|
Drill holes for plug welding in the side panel's new infill panel.
|
|
6.
|
Apply welding primer to the surfaces to be spot and plug welded. Use Teroson Zink Spray.
|
|
7.
|
Place the spare part in fitting position, position it precisely and secure with a few welding clamps
|
|
8.
|
Spot and plug weld the side panel's infill panel.
|
|
9.
|
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
|
10.
|
Apply primer to all bare metal surfaces. Use Standox 1K.
|
|
11.
|
Seal joints and sheet metal flanges with sealant. Use 1K-PUR.
|
|
12.
|
Apply anti-corrosion agent to internal surfaces after painting. Use Terotex HV 400.
|
