PRE-RELEASE
Upper mounting, radiator
| Upper mounting, radiator |
| Replacement |
| 1. |
Even out the break surface.
|
|
| 2. |
Fit the new mounting on the flange.
|
||||||||||
| 3. |
Drill holes through the mounting and flange using a 4 mm bit.
|
|
| 4. |
Remove the mounting from the flange. Fit the nut in the mounting.
|
|
| 5. |
Fit the mounting to the flange with washer and bolt.
Tightening torque 3.5 Nm (2.5 lbf ft) |
|
| 6. |
Fit the upper rubber supports to the radiator.
|
|
