PRE-RELEASE
Floor air distribution flap stepping motor
| Floor air distribution flap stepping motor |
| To remove |
| 1. |
Remove the
glove box
.
The floor air distribution flap stepping motor is the middle stepping motor. 
|
|
| 2. |
Dismantle the stepping motor's connector by pressing in the lock and pulling out the connector.
|
|
| 3. |
Dismantle the stepping motor screws and carefully pull out the stepping motor. Now move the motor forwards and downwards.
|
|
| 4. |
Dismantle the stepping motor from the heating and ventilation unit's link arm.
|
|
| To fit |
| 1. |
Fit the stepping motor to the heating and ventilation unit's link arm.
|
|
| 2. |
Fit the stepping motor to the heating and ventilation unit.
|
|
| 3. |
Connect the stepping motor's connector. Make sure the connector locks correctly.
|
|
| 4. |
Fit the
glove box
.
|
|
