PRE-RELEASE
Fifth bow
| Fifth bow |
| Removing |
| 1. |
Remove the
Headlining
until the headlining plastic holder can be removed from the fourth bow.
|
|
| 2. |
Remove the outer roof from the fifth bow.
|
|
| 3. |
Remove the seal by pulling it out of the middle part of the U-shaped rail. Unhook the upper part of the seal from the fastener. Let the seal hang.
|
|
| 4. |
Unhook the outer roof attaching profiles from the rear rails.
|
|
| 5. |
Drill out the blind rivets for the fifth bow guide strap and cable.
|
|
| 6. |
Remove the lock clip and fastening pin for the fifth bow.
|
|
| 7. |
Remove the fifth bow.
|
|
| Fitting |
| 1. |
Fit the fifth bow fastening pin and lock clip.
|
|
| 2. |
Fit the fifth bow guide strap and cable with blind rivets.
|
|
| 3. |
Hook the outer roof attaching profiles to the rear rails.
|
|
| 4. |
Fit the rear rail seals. Hook the top part of the seal to the mounting and then press it into the rail.
|
|
| 5. |
Remove the soft top support and raise the soft top fully.
|
|
| 6. |
Affix new double-sided adhesive tape to the fifth bow. Fold the fabric tabs of the outer roof around the fifth bow. Observe the centre markings on the parts.
|
|
| 7. |
Operate the soft top half way down and secure it with the soft top support to prevent it falling down when the hydraulic pressure drops.
|
|
| 8. |
Fit the
Headlining
.
|
|
