PRE-RELEASE
Third bow
| Third bow |
| Removing |
| 1. |
Remove the
Headlining
until the headlining plastic holder can be removed from the third bow.
|
|
| 2. |
Detach the outer roof from the third bow.
|
|
| 3. |
Lift off the bow mounting locking lugs using two screwdrivers. Knock loose the bow together with the bow mounting.
|
|
| 4. |
Remove the third bow.
|
|
| Fitting |
| 1. |
Put the third bow in mounting position. Press so that the bow mounting locking lugs hook on.
|
|
| 2. |
Remove the soft top support and raise the soft top fully.
|
|
| 3. |
Affix new double-sided adhesive tape to the third bow. Fold the fabric tabs of the outer roof around the third bow. Observe the centre markings on the parts.
|
|
| 4. |
Operate the soft top half way down and secure it with the soft top support to prevent it falling down when the hydraulic pressure drops.
|
|
| 5. |
Fit the
Headlining
.
|
|
