E39 / P013F 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on.
O2S 2 Signal, Delayed Response Lean to Rich
Fault symptom
CHECK ENGINE lamp on.
On-board diagnosis
Type of diagnosis:
Enable criteria:
| The following diagnostic trouble codes may not be generated: |
| P0116, P0117, P0118, P0119 |
| P0201, P0202, P0203, P0204 |
| Battery voltage must be between 11 - 16 V. |
| Engine running longer than 40 s. |
Fault criteria:
| When voltage across the sensor is less than 350 mV. |
Dependent:
OK report:
| Fault criteria NOT fulfilled. |
Fault handling:
| (See section Fault handling III, "Other emission-related components and functions" for more information.) |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| (See also description of readings/activations in diagnostic tool) |
