Crankshaft Balancer Removal
|
|
Crankshaft Balancer Removal
|
Special Tools
|
•
|
EN 38416-2
Crankshaft Button
|
|
•
|
EN 41816
Crankshaft Balancer Remover
|
|
•
|
EN-46106
Flywheel Holding Tool
|
For equivalent regional tools, refer to
Special Tools
.
|
1.
|
Install the EN 46106 through the starter mounting hole.
|
|
2.
|
Remove and discard the crankshaft balancer bolt.
|
|
3.
|
Install the
EN 38416-2
button in the nose of the crankshaft.
|
|
4.
|
Install the
EN 41816
remover in order to remove the crankshaft balancer.
|
|
5.
|
Tighten the center bolt of the
EN 41816
remover in order to pull the crankshaft balancer off of the crankshaft.
|
|
6.
|
Remove the
EN 41816
remover from the crankshaft balancer.
|
|
7.
|
Remove the
EN 46106
tool .
|
