SAAB WIS ONLINE

PRE-RELEASE

Crankshaft Front Oil Seal Replacement

Crankshaft Front Oil Seal Replacement


Special Tools

EN-29184 Oil Seal Installer

EN-45000 Oil Seal Remover

For equivalent regional tools, refer to Special Tools .

Removal Procedure


1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .


2. Remove the crankshaft's oil seal (2) using EN-45000 .

3. Use a flat-bladed tool in order to remove the crankshaft oil seal.


Installation Procedure


1.
Note

Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces.


Use the fitting tool EN-29184 (1) or equivalent to fit the crankshaft's front oil seal (2).


2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .


PRE-RELEASE