Engine Flywheel Cleaning and Inspection
|
|
Engine Flywheel Cleaning and Inspection
|
|
1.
|
|
Note
|
|
In order to maintain the proper component balance, contact surface taper and heat transfer, manual transmission flywheels are NOT to be machined.
|
Clean the engine flywheel in solvent.
|
|
1.
|
Inspect the engine flywheel for the following conditions:
|
|
|
•
|
Stress cracks around the engine flywheel-to-torque converter mounting bolt hole locations (1) and/or engine flywheel-to-crankshaft (2, 4)
|
|
|
•
|
|
Note
|
|
Do not attempt to repair the welded areas that retain the ring gear to the engine flywheel plate. Install a new engine flywheel.
|
Cracks at welded areas that retain the ring gear onto the engine flywheel (3)
|
|
|
•
|
Damaged or missing ring gear teeth (5)
|
|
2.
|
Replace the engine flywheel as necessary.
|
