Engine Oil and Oil Filter Replacement (LAU)
|
|
Engine Oil and Oil Filter Replacement (LAU)
|
|
2.
|
Place a drain pan under the oil drain plug.
|
|
3.
|
Remove the oil pan drain plug.
|
|
4.
|
Allow the oil to drain completely.
|
|
5.
|
Refer to
Fastener Caution
.
Install the oil pan drain plug and tighten to
25 Nm (18 lb ft)
.
|
|
6.
|
|
Note
|
|
DO NOT use an open end wrench on the hex on top of the oil filter cap.
|
Use a 32 mm (1 1/4 in) socket on the hex on top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap.
|
|
7.
|
Remove the oil filter cap and filter.
|
|
8.
|
Remove the filter from the cap.
|
|
1.
|
Install the NEW oil filter to the cap.
|
|
2.
|
Install the oil filter cap and filter.
|
|
3.
|
Warning
|
|
Over torquing the oil filter cap may cause damage to the oil filter cap resulting in an oil leak.
|
|
|
|
|
|
|
Note
|
|
DO NOT use an open end wrench on the hex on top of the oil filter cap.
|
Use a 32 mm (1 1/4 in) socket on the hex on top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap. Tighten the oil filter cap until fully seated. DO NOT exceed
25 Nm (18 lb ft)
.
|
