PRE-RELEASE
Engine Oil and Oil Filter Replacement (LF1 or LFW)
| Engine Oil and Oil Filter Replacement (LF1 or LFW) |
| Removal Procedure |
| 1. |
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
|
|
| 2. |
Place a drain pan under the oil pan drain plug.
|
|
| 3. |
Remove the oil pan drain plug. Allow the oil to drain completely.
|
|
| 4. |
Refer to
Fastener Caution
.
Install the oil pan drain plug and tighten to 20 Nm (15 lb ft) . |
|
| 5. |
Refer to
Hot Exhaust System Warning
.
Place the drain pan under the oil filter (1). 
|
|
| 6. |
Remove the oil filter. Allow the oil to drain completely.
|
|
| Installation Procedure |
| 1. |
Lubricate the NEW oil filter gasket with clean engine oil.
|
|
| 2. |
Tighten the oil filter (1) to
30 Nm (22 lb ft)
.
|
|
| 3. |
Lower the vehicle.
|
|
| 4. |
Refill the engine oil. Refer to
Approximate Fluid Capacities
.
|
|
| 5. |
Start the engine and inspect for leaks.
|
|
