SAAB WIS ONLINE

PRE-RELEASE

Oil Filter Upper End Plate Replacement

Oil Filter Upper End Plate Replacement



Callout Component Name

Preliminary Procedures

1. Drain the engine coolant. Refer to Cooling System, Draining and Filling (GE 47716) Cooling System, Draining and Filling (Static Fill LAU) Cooling System, Draining and Filling (Static Fill LF1)

2. Remove the auxiliary water pump. Refer to Auxiliary Water Pump Replacement (LAU) .

3. Disconnect the engine oil cooler outlet hose at the oil cooler. Refer to Engine Oil Cooler Outlet Hose Replacement (LAU) .

4. Disconnect the engine oil cooler hose/pipe at the oil cooler. Refer to Engine Oil Cooler Hose/Pipe Replacement (LAU) .

5. Remove the secondary air injection pump. Refer to Secondary Air Injection Pump Replacement .

6. Remove the air conditioning compressor bracket. Refer to Air Conditioning Compressor Bracket Replacement (LAU) .


1 Oil Pipe Turbo Feed Bolt Refer to Fastener Caution .

Tighten

35 Nm (26 lb ft)
2 Filter Adapter Fastener (Qty: 4)

Tighten

25 Nm (18 lb ft)
3 Filter Adapter Fastener (Qty: 2)

Tighten

25 Nm (18 lb ft)
4 Oil Filter Adapter and Oil Cooler Assembly

Procedure

1. Disconnect any electrical connectors.

2. Discard the gasket. Do NOT reuse.

3. Transfer components as necessary.




PRE-RELEASE