SAAB WIS ONLINE

PRE-RELEASE

Oil Level Indicator Tube Replacement (LF1 or LFW)

Oil Level Indicator Tube Replacement (LF1 or LFW)

Removal Procedure


1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement


2. Remove the oil level indicator tube bracket bolt (1).

3. Remove the oil level indicator and tube (2) by sliding the tube out from the lower crankcase hole.

4. Remove and discard the O-ring from the oil level indicator tube if damaged.



Installation Procedure


1. Install a NEW O-ring on the oil level indicator tube.


2. Install the oil level indicator and tube (2) by sliding the tube down through the lower crankcase hole.


3. Refer to Fastener Caution .

Install the oil level indicator tube bracket bolt (1) and tighten to 10 Nm (89 lb in) .

4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .


PRE-RELEASE