PRE-RELEASE
Turbocharger Coolant Return Pipe Installation
| Turbocharger Coolant Return Pipe Installation |
| 1. |
Install the turbocharger coolant return pipe (1).
|
|
| 2. |
Refer to
Fastener Caution
.
Install the NEW turbocharger coolant return pipe fitting (4) and (2) and tighten the banjo screw to 30 Nm (22 lb ft) . |
|
| 3. |
Install the bolt (3) for the turbocharger's coolant return pipe and tighten to
10 Nm (89 lb in)
.
|
|
