PRE-RELEASE

Body Control Module Replacement

Body Control Module Replacement

Callout	Component Name
Preliminary Procedures Remove the instrument panel driver knee bolster energy absorber. Refer to Instrument Panel Driver Knee Bolster Energy Absorber Replacement
1	Body Control Module Procedure 1. Disconnect the electrical connectors. 2. Release tab to remove the body control module from the bracket. 3. Reprogram the module if replaced. Refer to Control Module References .

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.