Multi-Axis Acceleration Sensor Module Programming and Setup
|
|
Multi-Axis Acceleration Sensor Module Programming and Setup
|
|
Note
|
|
The Multi-axis Acceleration Sensor is also known as the Inertia Sensor Module (IMU) in SPS. The sensor must be configured using SPS before the vehicle yaw sensor learn is performed.
|
The multi-axis acceleration sensor module must be configured.
Ensure that the following conditions exist in order to prepare for multi-axis acceleration sensor module for configuration
|
1.
|
The battery is fully charged.
|
|
2.
|
The MDI data link connectors are secure.
|
|
3.
|
The scan tool is loaded with the most current software version.
|
|
4.
|
All disconnected modules and devices are reconnected securely.
|
|
5.
|
This entire procedure has been reviewed before proceeding.
|
|
Multi-Axis Acceleration Sensor Module Configuration
|
A replacement multi-axis acceleration sensor module, requires the following procedure:
|
2.
|
On the SPS Supported Controllers screen, select IMU Inertia Sensor Module - Configuration and follow the on-screen instructions.
|
|
3.
|
With a scan tool, clear all DTC"s from all modules.
|
