|
Parameter
|
Expected Value
|
Description
|
|
Operating Conditions:
Ignition ON
|
|
Ambient Air Temperature
|
15 °C (59 °F)
|
The scan tool displays outside temperature in °C (°F).
|
|
Battery Voltage
|
12-14 V
|
The scan tool displays Volts. This is the current battery voltage signal.
|
|
Boost Pressure Sensor
|
0-100%
|
The scan tool displays the engine boost pressure filtered.
|
|
Coolant Level Switch
|
Open
|
The scan tool displays either Open, Closed, or Not Available.
|
|
Driver Information Center Reset Switch
|
Active/Inactive
|
The scan tool displays Active or Inactive. This is the state of the driver information center reset switch.
|
|
Driver Information Center Switch
|
Varies
|
The scan tool displays Volts. This is the current driver information center switch input voltage.
|
|
Driver Information Center Switch
|
Inactive
|
The scan tool displays either Inactive, Up, Down, or Menu. This is the state of the driver information center switch.
|
|
Engine Coolant Temperature
|
°C (°F)
|
The scan tool displays actual engine coolant temperature filtered.
|
|
Engine Oil Pressure
|
103 kPa (15 PSI) to 241 kPa (35 PSI)
|
The scan tool displays the engine oil pressure filtered.
|
|
Engine Speed
|
RPM
|
The scan tool displays the actual engine speed.
|
|
Fuel Level Sensor
|
%
|
The scan tool displays fuel level percent filtered.
|
|
Key in Ignition Status
|
Active/Inactive
|
The scan tool displays Active or Inactive. This is the state of the key in ignition switch.
|
|
Odometer Lock Status
|
Active/Inactive
|
This is the state of vehicle odometer status.
|
|
Reset Switch
|
Active/Inactive
|
The scan tool displays Active or Inactive. This is the state of the reset switch.
|
|
Vehicle Speed
|
km/h (MPH)
|
The scan tool displays the actual vehicle speed.
|
|
Washer Fluid Level Switch
|
Open
|
The scan tool displays either Open, Closed, or Not Available.
|
