SAAB WIS ONLINE

PRE-RELEASE

Liftgate Close Actuator Motor Control Module Scan Tool Information

Liftgate Close Actuator Motor Control Module Scan Tool Information


Liftgate Module Scan Tool Data Parameters

Parameter Expected Value Description
Operating Conditions: Ignition ON
In Park Switch Status On/Off The scan tool displays Off or On. On is displayed if the vehicle was in Park during the last open or close history data.
Liftgate Angle The scan tool displays the calculated angle in degrees of the liftgate relative to the liftgate latch.
Liftgate Front Control Switch Active/Inactive The scan tool displays Active or Inactive. This is the state of the front control switch of the liftgate module.
Liftgate Handle Switch Active/Inactive The scan tool displays Active or Inactive. This is the state of the liftgate handle switch.
Liftgate Mode Switch Varies The scan tool displays the current setting of the mode switch in Counts which varies depending upon if the switch is in the Off, 3/4 or Max position and the system voltage.
Liftgate Rear Close Switch Active/Inactive The scan tool displays Active or Inactive. This is the state of the liftgate shutface switch.
Liftgate Latch Pawl Switch Active/Inactive The scan tool displays Active or Inactive. This is the state of the latch pawl switch.
Liftgate Latch Ratchet Switch Active/Inactive The scan tool displays Active or Inactive. This is the state of the latch ratchet switch.
Liftgate Latch Sector Switch Active/Inactive The scan tool displays Active or Inactive. This is the state of the latch sector switch.
Liftgate System Voltage 1 11.5-13.0 V The scan tool displays the battery system 1 voltage input to the liftgate module.
Liftgate System Voltage 2 11.5-13.0 V The scan tool displays the battery system 2 voltage input to the liftgate module.
Secondary Obstacle Detection Liftgate 3-3.5 V The scan tool displays the actual voltage on the liftgate object sensor circuit. Voltage is measured by the liftgate module.


PRE-RELEASE