PRE-RELEASE
Brake Pedal Adjuster Actuator Cable Replacement
| Brake Pedal Adjuster Actuator Cable Replacement |
| Removal Procedure |
| Note | ||
|
Move the adjustable pedal assembly to the full forward, front of vehicle position prior to removing components. Failure to place the adjustable pedal assembly in the full forward position may result in incorrect accelerator and brake pedal step-over height and improper adjustable pedal function. |
| 1. |
Move the adjustable pedal assembly to the full forward, front of vehicle position.
|
|
| 2. |
Remove the driver knee bolster. Refer to
Driver knee bolster panel replacement
|
|
| 3. |
Release the brake pedal adjuster actuator cable locking collar (1) from the brake pedal adjuster actuator assembly by rotating the collar counterclockwise.
|
|
| 4. |
Release the brake pedal adjuster actuator cable locking collar (1) from the brake and accelerator adjuster actuator motor by rotating the collar counterclockwise.
|
|
| 5. |
Remove the brake pedal adjuster actuator cable from the adjustable pedal assembly. |
|||||||
| Installation Procedure |
| 1. |
Install the brake pedal adjuster actuator cable to the adjustable pedal assembly.
|
|
| 2. |
Engage the brake pedal adjuster actuator cable locking collar (1) to the brake and accelerator adjuster actuator motor by rotating the collar clockwise.
|
|
| 3. |
Engage the brake pedal adjuster actuator cable locking collar (1) to the brake pedal adjuster assembly by rotating the collar clockwise.
|
|
| 4. |
Install the driver knee bolster. Refer to
Driver Knee Bolster Panel Replacement
|
|
| 5. |
Calibrate the adjustable pedal system. Refer to
Adjustable Pedal System Calibration
.
|
|
