Backup and Rear Fog Lamp Replacement
|
|
Backup and Rear Fog Lamp Replacement
|
|
Callout
|
Component Name
|
Preliminary Procedures
|
1.
|
Warning
|
|
When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
|
|
|
|
|
|
Open and support the rear liftgate assembly.
|
|
|
1
|
Back Up and Rear Fog Lamp Nut (Qty: 2)
|
Warning
|
|
When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
|
|
|
|
|
|
Refer to
Fastener Caution
.
Tighten
4 Nm (35 lb in)
Procedure
Remove both lower and upper brackets from inside the liftgate lamp assembly.
|
|
2
|
Back Up and Rear Fog Lamp Assembly
Procedure
|
1.
|
Carefully push the lamp assembly outward away from the liftgate lower outer panel.
|
|
2.
|
Disconnect the electrical harness connector prior to removing the lamp assembly from the liftgate outer panel.
|
|
3.
|
Transfer the back up lamp socket harness as needed.
|
|
