Brake Pedal Position Sensor Calibration
|
|
Brake Pedal Position Sensor Calibration
|
|
Note
|
|
Do not apply the brake pedal during the brake pedal position sensor calibration procedure. Any movement of the brake pedal during this procedure will cause the calibration procedure to fail. If this occurs, the brake pedal position sensor calibration must be repeated.
|
Brake pedal position sensor calibration must be performed after the brake pedal position sensor or body control module (BCM) have been serviced. The calibration procedure will set the brake pedal position sensor home value. This value is used by the BCM to determine the action of the driver applying the brake system and to provide this information to the vehicle subsystems via serial data.
|
1.
|
Apply the parking brake.
|
|
2.
|
Place the transmission in the PARK position.
|
|
4.
|
Clear all BCM DTCs before proceeding.
|
|
5.
|
Navigate to the Module Diagnosis menu.
|
|
7.
|
Select Configuration/Reset Functions menu item.
|
|
8.
|
Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
|
