Front Side Turn Signal Lamp Replacement
|
|
Front Side Turn Signal Lamp Replacement
|
|
Callout
|
Component Name
|
Refer to
Exterior Trim Emblem Removal Caution
.
Preliminary Procedures
|
1.
|
Using a small flat-bladed tool, push inward on the front end of the lamp, just behind the alignment pin and release the turn signal lamp tab from the fender opening.
|
|
2.
|
Pull the turn signal lamp outward, away from the fender.
|
|
3.
|
Disconnect the electrical connector.
|
|
|
1
|
Front Side Turn Signal Lamp
Procedure
|
1.
|
Connect the electrical connector back into the lamp assembly.
|
|
2.
|
Use the alignment pins upon installation of the new lamp into the fender opening.
|
|
3.
|
Insert the rear edge of the lamp first, to the fender followed by the front.
|
|
4.
|
Push inward on the lamp until both locking tabs are secure to the fender opening.
|
|
