Headlamp Ballast Replacement
|
|
Headlamp Ballast Replacement
|
|
Callout
|
Component Name
|
Warning
|
|
The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.
|
|
|
|
|
|
|
Warning
|
|
The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:
|
|
•
|
Never open the high intensity discharge system ballast or the arc tube assembly starter.
|
|
•
|
Never probe between the high intensity discharge system ballast output connector and the arc tube assembly.
|
|
|
|
|
|
Preliminary Procedures
|
2.
|
Remove the headlamp accessory cover.
|
|
3.
|
Disconnect the electrical harness connector from the headlamp igniter.
|
|
|
1
|
Ballast Screw (Qty: 3)
Refer to
Fastener Caution
.
|
|
2
|
Headlamp Ballast
Procedure
Pull the ballast from the bottomside of the headlamp housing and disconnect the electrical connector.
|
