Headlamp Ignitor Replacement (TT6 Left Hand)
|
|
Headlamp Ignitor Replacement (TT6 Left Hand)
|
|
Callout
|
Component Name
|
Warning
|
|
The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.
|
|
|
|
|
|
|
Warning
|
|
The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:
|
|
•
|
Never open the high intensity discharge system ballast or the arc tube assembly starter.
|
|
•
|
Never probe between the high intensity discharge system ballast output connector and the arc tube assembly.
|
|
|
|
|
|
Preliminary Procedures
Open and support the hood assembly.
|
|
1
|
Headlamp Bulb Accessory Cover
Procedure
Rotate the headlamp accessory bulb cover counter-clockwise and remove.
|
|
2
|
Headlamp Starter and Cable
Procedure
Disconnect the starter and cable assembly from the headlamp high intensity discharge bulb housing assembly.
|
|
3
|
High Intensity Discharge Bulb
|
1.
|
Squeeze the retainer clip at the top securing the high intensity discharge bulb to the headlamp housing.
|
|
2.
|
Remove the bulb from the headlamp assembly.
|
|
