Rear Parking Assist Alarm Sensor Replacement
|
|
Rear Parking Assist Alarm Sensor Replacement
|
|
2.
|
Disconnect electrical from the rear object sensor.
|
|
3.
|
Lift the locking tabs on the housing and remove the rear object sensor.
|
|
1.
|
|
Note
|
|
Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.
|
Paint the rear object sensor. Refer to
Basecoat/Clearcoat Paint Systems
.
|
|
2.
|
Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to
Paint Gauges
.
|
|
3.
|
|
Note
|
|
Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.
|
Insert the sensor into the housing.
|
|
4.
|
Connect the electrical connector to the rear object sensor.
|
