PRE-RELEASE
Symptoms - Object Detection
| Symptoms - Object Detection |
| Note | ||
|
The following steps must be completed before using the symptom tables: |
| 1. |
Perform the
Diagnostic System Check - Vehicle
before using the Symptom Tables in order to verify that all of the following are true:
|
|
| • |
There are no DTCs set.
|
| • |
The control modules can communicate via the serial data link.
|
| 2. |
Review the system operation in order to familiarize yourself with the system functions. Refer to
Object Detection Description and Operation (UVC)
Object Detection Description and Operation (UD5)
.
|
|
| Visual/Physical Inspection |
| • |
Inspect for aftermarket devices which may affect the operation of the system. Refer to
Checking Aftermarket Accessories
.
|
|
| • |
Inspect for easily accessible or visible system components for obvious damage or conditions which may cause the symptom.
|
|
| • |
Make sure the parking assist sensors located on the rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors.
|
|
| • |
Make sure the rear vision camera is clear. Remove any snow, mud or ice that is blocking the rear vision camera.
|
|
| Intermittent |
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .
| Symptom List |
| • |
Parking Assist System Malfunction
|
|
| • |
Rear Vision Camera System Malfunction
|
|
