Rear Window Washer Nozzle Adjustment
|
|
Rear Window Washer Nozzle Adjustment
|
|
1.
|
|
Note
|
|
All adjustments must be completed with the liftgate assembly in the FULL closed position.
|
The first measurement (a) is from the centerline of the rear window washer nozzle, downward in a vertical line.
|
|
2.
|
Measure from the bottom edge of the rear end spoiler (a) in an downward vertical line between 124-192 mm (4.8-7.5") to have the location for the top edge of the spray pattern.
|
|
3.
|
Make a small mark with a wax-pencil to use as a reference point when the rear washer spray pattern is tested.
|
|
4.
|
Measure from the bottom edge of the rear end spoiler (b) in a downward vertical line between 87-116 mm (3.4-4.5") to have the location for the top outer edge of the upper spray pattern.
|
|
5.
|
Make a small mark with a wax-pencil to use as a reference point when the rear washer spray pattern is tested.
|
|
6.
|
Measure from the outer left side edge of the liftgate glass (c) in a horizontal line between 491-495 mm (19.3-19.4") to have the location for the inner edge of the lower spray pattern.
|
|
7.
|
Make a small mark with a wax-pencil to use as a reference point when the rear washer spray pattern is tested.
|
|
8.
|
Measure from the outer left side edge of the liftgate glass (d) in a horizontal line between 365-380 mm (14.3-15") to have the location for the outer edge of the lower spray pattern.
|
|
9.
|
Make a small mark with a wax-pencil to use as a reference point when the rear washer spray pattern is tested.
|
|
10.
|
Operate the rear washer system and notice the spray contact patterns as the washe nozzle sprays.
|
|
11.
|
Turn OFF the rear wiper washer system and make any needed adjustment to the rear window washer nozzle.
|
|
12.
|
Use a small flat-bladed tool in order to move and adjust the ball socket within the rear window washer nozzle.
|
|
13.
|
After every adjustment, re-check the spray pattern contact location, (as shown) of the rear window washer solvent contact to the liftgate glass surface.
|
|
14.
|
Clean the liftgate glass, removing the wax-pencil marks made previously from the spray pattern reference points.
|
|
15.
|
Fill the windshield washer solvent container to full capacity.
|
