Windshield Washer Solvent Container Replacement
|
|
Windshield Washer Solvent Container Replacement
|
|
Callout
|
Component Name
|
Preliminary Procedures
|
3.
|
Drain the windshield washer solvent into a suitable clean container.
|
|
4.
|
Disengage the headlamp washer nozzle hose from the headlamp washer pump hose at the front of the windshield washer solvent container.
|
|
5.
|
Disconnect the main harness electrical connector at the front of the windshield washer solvent container.
|
|
6.
|
Disconnect the windshield washer nozzle hose and headliner washer hose at the windshield washer pump.
|
|
|
1
|
Windshield Washer Solvent Container Bolt (Qty: 3)
Refer to
Fastener Caution
.
Tighten
6 Nm (53 lb in)
|
|
2
|
Windshield Washer Solvent Container
Procedure
|
1.
|
Carefully lower and remove the windshield washer solvent container from the left front inner front compartment upper side rail brackets.
|
|
2.
|
Remove the windsheld washer solvent container hose from the container.
|
|
3.
|
Disconnect the level sensor electrical connector.
|
|
4.
|
Disconnect both headlamp and windshield washer pump electrical connectors.
|
|
5.
|
Transfer the windshield washer pump container main electrical harness assembly.
|
|
