Windshield Wiper Arm Replacement
|
|
Windshield Wiper Arm Replacement
|
|
Callout
|
Component Name
|
Preliminary Procedures
Open and support the hood in order to access and remove the wiper arm assembly.
|
|
1
|
Windshield Wiper Arm Nut Cover
|
Note
|
|
Gently pry the cap from the wiper arm nut.
|
|
|
2
|
Windshield Wiper Arm Nut
Refer to
Fastener Caution
.
Tighten
27 Nm (20 lb ft)
|
|
3
|
Windshield Wiper Arm
Procedure
|
1.
|
Gently rock the wiper arm side to side and remove.
|
|
2.
|
Clean the transmission pivot shaft with a soft wire brush prior to installing the wiper arm back onto the pivot shaft.
|
|
4.
|
Hold the driver side wiper arm blade tip to the center dot located in the windshield blackout below the dot matrix while securing the nut.
|
|
5.
|
Hold the passenger side wiper arm blade tip to the passenger side outer dot located in the windshield blackout below the dot matrix while securing the nut.
|
|
