PRE-RELEASE
Symptoms - Wiring Systems
| Symptoms - Wiring Systems |
| Note | ||
|
The following steps must be completed before using the symptom tables. |
| 1. |
Perform the
Diagnostic System Check - Vehicle
before using the symptom tables in order to verify that all of the following are true:
|
|
| • |
There are no DTCs set.
|
| • |
The control modules can communicate via the serial data links.
|
| 2. |
Review the system operation in order to familiarize yourself with the system functions. Refer to:
|
|
| • |
Power Mode Description and Operation
|
| • |
Retained Accessory Power Description and Operation
|
| Visual/Physical Inspection |
| • |
Inspect for aftermarket devices which could affect the operation of the systems. Refer to
Checking Aftermarket Accessories
.
|
|
| • |
Inspect for easily accessible or visible system components for obvious damage or conditions which may cause the symptom.
|
|
| Intermittent |
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .
| Symptom List |
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
| • |
Power Mode Mismatch
|
|
| • |
Retained Accessory Power Malfunction
|
|
