Torque Converter and Differential Housing Assembly Assemble
|
|
Torque Converter and Differential Housing Assembly Assemble
|
|
Pump Assembly Installation
|
Pump Assembly Installation
|
Callout
|
Component Name
|
|
1
|
Drive Sprocket Thrust Washer
|
|
2
|
Drive Sprocket Thrust Washer
|
|
3
|
Install Drive Link Assembly
|
Note
|
|
Install as an assembly.
|
|
|
4
|
A/Trans Fluid Pump Assembly
|
Note
|
|
Rotating the drive sprocket and link assembly while installing the oil pump will aid in aligning the driven sprocket and oil pump drive shaft splines.
|
|
|
5
|
A/Trans Fluid Pump Bolt M6 x 25 (Qty: 3)
Refer to
Fastener Caution
.
Procedure:
Tighten in sequence shown.
Tighten
12 Nm (106 lb in).
|
|
Transfer Drive Gear Assembly Installation
|
Transfer Drive Gear Assembly Installation
|
Callout
|
Component Name
|
|
1
|
Drive Sprocket Thrust Washer
|
|
2
|
Front Differential Transfer Drive Gear Support Assembly
|
|
3
|
Front Differential Transfer Drive Gear Support Bolt M8 x 25 (Qty: 9)
Refer to
Fastener Caution
.
Procedure
Tighten in sequence shown.
Tighten
10 Nm (89 lb in) plus 50 degrees ± 4 degrees.
Special Tools:
EN 45059
Angle Meter
For equivalent regional tools, refer to
Special Tools
.
|
|
4
|
Front Differential Carrier Baffle
|
|
5
|
Front Differential Carrier Baffle Bolt M6 x 25
Tighten
12 Nm (106 lb in).
|
