|
Callout
|
Component Name
|
|
1
|
Lock Pin
Warning
|
|
Lock pin must be secured into the bench fixture to hold the transmission and prevent bodily injury.
|
|
|
|
|
|
|
Note
|
|
Ensure the
DT 3289-20
holding fixture is mounted to a bench that is properly supported and will support the weight of the transmission assembly without tipping.
DT-39890
holding fixture adapter adapter and an engine stand can be used as an alternative method for supporting the transmission assembly during repairs.
|
Special Tools
|
•
|
DT 3289-20
Holding Fixture
|
|
•
|
DT-39890
Transmission Holding Fixture Adapter
|
For equivalent regional tools, refer to
Special Tools
.
|
|
2
|
DT 21366
Converter Holding Strap
For equivalent regional tools, refer to
Special Tools
.
|
|
3
|
Dust Cover Bolts M10 x 25, model dependent (Qty: 2)
|
|
4
|
Dust Cover Push Pin, model dependent
|
|
5
|
Dust Cover, model dependent
|
|
6
|
Torque Converter Assembly
|
Warning
|
|
Only install the lift assist handles until it stops. Do not tighten. Over tightening the lift assist handles can cause damage to the torque converter.
|
|
|
|
|
|
|
Note
|
|
Failure to raise the torque converter straight up could damage the torque converter clutch lip seal inside the torque converter clutch assembly.
|
Special Tools
DT 46409
Torque Converter Lifting Handles
For equivalent regional tools, refer to
Special Tools
.
|
