SAAB WIS ONLINE

PRE-RELEASE

Transmission Fluid Cooler Outlet Pipe Replacement

Transmission Fluid Cooler Outlet Pipe Replacement



Callout Component Name

Preliminary Procedures

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the range selector lever cable from transmission only. Refer to Range Selector Lever Cable Replacement


1 Transmission Fluid Cooler Outlet Pipe Nut Refer to Fastener Caution .

Tighten

22 Nm (16 lb ft)
2 Front Transmission Fluid Cooler Outlet Pipe Quick Disconnect

Preliminary Procedures

Disconnect the transmission line from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
3 Front Transmission Fluid Cooler Outlet Pipe

Procedure

1. Install new sealing washers.

2. Note the routing of the transmission line to ensure proper installation.

3. Remove the transmission line from the clips securing the line to the transmission and fan shroud.

4. Inspect the transmission fluid level. Refer to Transmission Fluid Level and Condition Check .




PRE-RELEASE