Transmission Fluid Pump Cleaning and Inspection
|
|
Transmission Fluid Pump Cleaning and Inspection
|
|
Callout
|
Component Name
|
Warning
|
|
After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure.
|
|
|
|
|
|
|
Warning
|
|
Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component.
|
|
|
|
|
|
Preliminary Procedures
The fluid pump assembly is not serviceable.
|
|
1
|
Filter Neck Seal
|
Note
|
|
Install a NEW filter neck seal.
|
Special Tools
28585
Snap ring Remover or equivalent
For equivalent regional tools, refer to
Special Tools
.
|
|
2
|
A/Trans Fluid Filter Assembly
|
Note
|
|
Install a NEW fluid filter assembly.
|
|
|
3
|
Fluid Pump Drive Shaft
|
Note
|
|
•
|
Inspect the fluid pump drive shaft splines for damage or wear.
|
|
•
|
Rotate the fluid pump drive shaft for free operation.
|
|
