PRE-RELEASE
Wheel Drive Shaft Inner Joint Inspection
| Wheel Drive Shaft Inner Joint Inspection |
| Inspection Procedure |
| 1. |
Remove the wheel drive shaft inner joint and boot.
|
|
| • |
For the front wheel drive shaft, refer to
Front Wheel Drive Shaft Inner Joint and Boot Replacement
.
|
| • |
For the rear wheel drive shaft, refer to
Rear Wheel Drive Shaft Inner Joint and Boot Replacement
|
| 2. |
Remove the wheel drive shaft tripot bushing (1) from the tripod housing (3).
|
|
| 3. |
Remove the wheel drive shaft tripot housing (3) from the wheel drive shaft.
|
|
| 4. |
Remove the wheel drive shaft tripot joint boot bushing (1).
|
|
| 5. |
Using a suitable cleaner, remove the excess grease from the tripod assembly.
|
|
| 6. |
Inspect the following items for damage or excessive wear:
|
|
| • |
The wheel drive shaft tripot boot
|
| • |
The wheel drive shaft tripot assembly
|
| • |
The wheel drive shaft tripot joint housing
|
| • |
The wheel drive shaft tripot joint bushing
|
| • |
The wheel drive shaft
|
| 7. |
If any of the internal parts are found to be excessively worn or damaged, replace the wheel drive shaft inner joint and boot.
|
|
| • |
For the front wheel drive shaft, refer to
Front Wheel Drive Shaft Inner Joint and Boot Replacement
.
|
| • |
For the rear wheel drive shaft, refer to
Rear Wheel Drive Shaft Inner Joint and Boot Replacement
|
